While searching for the ideal pattern for your new Pool Deck or Driveway, you must seal your Travertine tile to preserve its natural beauty for years to come. Sealing pavers is a fantastic idea, and it has several benefits. Aside from making your stone more resistant, these pavers extend their life. If you want to keep acidic items from corroding your travertine pavers, you’ll need to seal them. More common acidic sources are acidic rain and even everyday household items like lemon juice, wine, and soda pop. If you treat the surface of travertine with the correct sealer, it will retain its natural beauty.

To preserve the natural beauty of Travertine tiles, it is necessary to seal them regularly. Sealing travertine requires careful consideration of several variables, including the site of the installation, the activities that will take place around the pavers, and even the sealer to be used. You need to consider all these issues before making a final selection, so let’s go through them together.

How to Seal Travertine?

With travertine sealing, the process is straightforward and may be completed throughout a weekend or holiday. To avoid permanent staining, it’s best to seal your pavers as soon as possible after installation. If you’ve already done so, check to ensure there aren’t any stains on your pavers before applying sealer. Clean the pavers with a power washer before applying the sealer to ensure the clarity of any debris or other pollutants.

After cleaning, it’s recommended that you wait at least two days if not three. They may be sealed as soon as they have dried. It’s not difficult to figure out. It’s not difficult to follow the sealer’s directions. If you follow their instructions, you should get an even coat of sealer on all the paving stones. Two applications of sealer are suggested for best results.

Choose the Paver Type That Fits Your Needs

Keep in mind that different types of pavers will necessitate different sealers while preparing to sell them. For example, crevices and holes in polished travertine will be less absorbent than those in unpolished travertine. Apply a sealer designed to coat these fewer absorbent regions if you want your pavers to have a more natural, non-glossy appearance.

Choosing the Best Sealer

Choose a sealer manufactured particularly for travertine pavers to avoid staining and decreasing the life of your pavers if you use the wrong kind. Look at the sealer’s instructions before applying it. A travertine sealer may be confirmed by doing this. Choose an impregnating sealer over a standard one if you want to keep the paver’s natural beauty and non-skid surface intact. Also, be sure that the sealer you use is transparent and able to breathe. Verify the warranty on the goods. Several sealers promise their sealer will last for up to 15 years.

Using the Right Cleaner to Clean Your Pavers

Your pavers should be thoroughly cleaned with a cleaner that is compatible with your sealer before applying it. Travertine sealer manufacturers typically produce a cleaning that performs better with their sealer because this chemical match is so critical. You must follow the manufacturer’s instructions for applying the cleaner because each cleaner has a unique composition.

Applying Travertine Sealers

Apply a little water application to the brick paver’s surface before spraying the sealer you’ve chosen using a spray bottle. Allow the water to dry for a few minutes. Your sealer won’t provide the protection you want if you wait until the water has dried entirely. According to the manufacturer’s recommendations, follow the sealer application directions and use a roller, brush, or cloth. The sealant should be applied to the whole paver surface. Wipe off any remaining sealant with an absorbent white towel after about 30 minutes. Using white fabric prevents the brick paver from picking up undesirable textile colors from the cloth.


Once the first layer of sealer has been removed, immediately apply a second coat. Before letting traffic on the sealer, wait at least 48 hours for it to cure.


Travertine pavers may be effectively maintained by sealing them. Your pavers will be able to survive severe weather and heavy traffic thanks to sealers. They are also resistant to stains. You must reapply them every two years or so, which is the one big downside. On the other hand, Sealing is a simple operation that can be completed in a matter of hours.

It’s critical that you use the correct sealer for the work at hand. Travertine’s functioning might be harmed if the sealer is incorrect. Penetrating sealers are the best choice, although enhancing sealers are not far behind. There are many resources available to help you go through all the possibilities and weigh all the pros and disadvantages before making a final decision. You are welcome to contact us if you have any more questions.